Pitney Bowes Connect+ 1000 - Run Mail Options; Step-By-Step Running Mail

Connect+® Series Operator Guide
Run Mail Options
Select Options button at the bottom of the Run Mail screen and select the appropriate
option.
These options include:
l
Print a sample piece - prints an envelope or tape so you can see exactly how the
address, inscriptions, ads or graphics elements will print on the mail piece for the current
job.
l
Zero scale - this ensures that the attached scale is reading zero when there are no mail
pieces on it.
l
Create a new job - select this to create a new job.
l
High value warning - set a value at which the mailing system warns you that you have
entered a postage value that is more than the amount you are setting here. This feature
prevents you from accidentally printing a postage amount that is more than you need.
Step-by-Step Running Mail
Use the Run Mail screen to select your job or review current job settings. This screen also
keeps a running count of the processed mail. Refer to Run Mail Screen Icons and Buttons for
a summary of the screen icons.
NOTE: if you have accounts enabled on your system, you must select an account before
you can run a mail job.
1. Select theRun Mail button from the Home screen.
2. Select an available job tab (or jobs) or open another job using the Open a Job tab along
the top of the screen.
3. Verify the current job settings displayed in the Job Properties list box on the left side of
the Run Mail screen. To change any of the settings, simply select the item, for example,
select Class to change the class.
More information:
a. To change the weighing or sealing method, select its icon on the Run Mail screen.
b. To enter a new postage amount, select the Key in Postage tab at the bottom of the
screen, or select the postage amount in the Run Mail screen.
52
SV62250 Rev. G