Pitney Bowes Connect+ 1000 - Selecting a Tracking Service

Connect+® Series Operator Guide
You can eliminate the traditional "Green Card" and save money as well by using the Elec-
tronic Return Receipt (ERR) option on your system.
Selecting a Tracking Service
For information on Tracking Services, refer to What are Tracking Services.
Tracking services are available when you use the Attached Scale, or Manual Weight entry
method. The following steps are based on using Priority class and the Electronic Delivery
Confirmation service. Your procedure may vary slightly depending on the class and service
you choose. If you are using Electronic Certified service with the Electronic Return Receipt
(ERR) option, refer to How to Use Electronic Return Receipt (ERR).
1. Place the piece of mail or package on the scale.
2. Select Class from the Job Properties list on the left side of the screen.
3. Select the class from the Class services list box, in this example, Priority Mail Retail.
4. Select the mail piece type, in this example, Envelope or package.
5. You are prompted to enter the Destination ZIPor Zone code. Enter the ZIPcode and then
select This is a ZIP.
6. Select the special service from the Extra services list on the right. For this example, use
Electronic Delivery Confirmation. As soon as you select the service, a check mark
appears in front of it and you are prompted to enter the tracking number.
7. When entering the tracking number:
a. If this is the first time you are entering a confirmation service, the field for the tracking
number is blank and you need to enter the entire number. If you have a barcode
scanner, you can scan in the number.
b. If you have used all of the labels in a series of tracking number labels, make sure you
start with the top label with the lowest last 4-digits and not the bottom label with the
highest last 4-digits.
c. If you have used the confirmation service before, the next tracking number (in the
series of tracking number labels) appears, minus the last digit. You will be prompted
to enter the last digit of the tracking number that is to be used on the mail piece.
8.
Once you enter the tracking number, the envelope that displays in the Run Mail screen
refreshes showing where you should place the tracking number label.
90
SV62250 Rev. G