DOIPW009R10003
8. Remove the wheel nuts with the
wheel nut wrench, then remove the
wheel.
9. Clean out any mud on the hub sur-
face (F), hub bolts (G) or in the in-
stallation holes (H) in the wheel.
DOITW009R16006
10. Install the spare tyre and tighten
the wheel nut with your fingers.
DOITW009R16007
11. Tighten the wheel nuts with the
wheel nut wrench.
Push the end of the tyre wrench
with your hand until the nut is fully
locked.
DOITW009R16008
NOTE
Do not reinstall the wheel nut cov-
ers to the wheel nuts if use spare
wheel.
Do not forget to reinstall the wheel
nut covers (A) once the original
wheel is repaired and reinstalled.
DOIRW009R18011
12. On vehicles with wheel covers, in-
stall the covers.
119
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.
To Next Page
Loading...