DOIUW009R20001
Type 2
How to change a tyre
1. Some vehicles may be fitted with
wheel covers but some has wheel
nut covers (A).
DOIRW009R18009
2. On vehicles with wheel covers, first
remove the covers.
3. On vehicles with wheel nut covers
(A), remove them using the wheel
nut cover removal tool (B). Keep
the wheel nut covers in a safe place.
DOIRW009R18010
4. Loosen the wheel nuts a quarter
turn with the wheel nut wrench.
Do not remove the wheel nuts.
DOIUW009R16004
5. Put the jack at the bottom of one
of the jacking points (A) shown in
the illustration.
DOIPW009R10001
6. Turn the jack to the right with your
hand. Turn until the flange part (B)
attaches in the groove (C) at the
top of the jack.
DOIPW009R10002
7. Install the end of the bar (hook end
shape) into the shaft of the jack
end.
Install the bar (D) into the wheel
nut wrench (E).
Slowly turn the wheel nut wrench
until the tyre is lifted from the
ground.
118
For Emergencies
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.
To Next Page
Loading...