BIOS UPDATE UTILITY BIOS
3-43
Microcode updates
ME Firmware
BIOS Setting Utility
Use AMISCE to import/export BIOS setting in Linux:
1. Export BIOS setting and generate script file:
/o /s NVRAM.txt
2. Import BIOS setting with script file:
/i /s NVRAM.txt
BIOS Recovery
If BIOS update procedure is interrupted then system will stop at 0xF2 POST code when
reboot up, in this case please follow the steps to recover BIOS.
1. Plug-in the recovery media with AMIBOOT.ROM file.
- Rename BIOS_NAME.ROM to AMIBOOT.ROM and copy into USB disk root directory,
plug-in system.
2. Power on the system.
3. System will automatically boot into BIOS setup menu [Recovery] page.
Figure 3-38. BIOS Recovery Menu
Version 2.14.1219 - Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Event Logs
RecoveryBoot Security Save & Exit
WARNING! BIOS Recovery mode has been detected
Flash Update Parameters
Reset NVRAM [Enabled]
Proceed with flash update
Set this option to
reset NVRAM to
default values
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
To Next Page
Loading...
Need help?
General
