To Next Page

To Previous Page

CHECKPOINTS BIOS

3-53

PEI Phase

Table 43: PEI Phase

STATUS CODE DESCRIPTION

Progress Codes

0x10 PEI Core is started

0x11 Pre-memory CPU initialization is started

0x12 Pre-memory CPU initialization (CPU module specific)

0x13 Pre-memory CPU initialization (CPU module specific)

0x14 Pre-memory CPU initialization (CPU module specific)

0x15 Pre-memory North Bridge initialization is started

0x16 Pre-Memory North Bridge initialization (North Bridge module specific)

0x17 Pre-Memory North Bridge initialization (North Bridge module specific)

0x18 Pre-Memory North Bridge initialization (North Bridge module specific)

0x19 Pre-memory South Bridge initialization is started

0x1A Pre-memory South Bridge initialization (South Bridge module specific)

0x1B Pre-memory South Bridge initialization (South Bridge module specific)

0x1C Pre-memory South Bridge initialization (South Bridge module specific)

0x1D – 0x2A OEM pre-memory initialization codes

0x2B Memory initialization. Serial Presence Detect (SPD) data reading

0x2C Memory initialization. Memory presence detection

0x2D Memory initialization. Programming memory timing information

0x2E Memory initialization. Configuring memory

0x2F Memory initialization (other).

0x30 Reserved for ASL (see ASL Status Codes section below)

0x31 Memory Installed

0x32 CPU post-memory initialization is started

0x33 CPU post-memory initialization. Cache initialization

0x34 CPU post-memory initialization. Application Processor(s) (AP) initialization

0x35 CPU post-memory initialization. Boot Strap Processor (BSP) selection

0x36 CPU post-memory initialization. System Management Mode (SMM) initialization

0x37 Post-Memory North Bridge initialization is started

0x38 Post-Memory North Bridge initialization (North Bridge module specific)

0x39 Post-Memory North Bridge initialization (North Bridge module specific)

0x3A Post-Memory North Bridge initialization (North Bridge module specific)

0x3B Post-Memory South Bridge initialization is started

0x3C Post-Memory South Bridge initialization (South Bridge module specific)

0x3D Post-Memory South Bridge initialization (South Bridge module specific)

0x3E Post-Memory South Bridge initialization (South Bridge module specific)

QUANTA Rackgo X Series F03A User Manual

Questions and Answers: