Configuration Chapter 7
WinLink 1000 User Manual Release 1.9.40 7-8
The Channel Bandwidth may also be changed. The available choices are 5, 10 and
20MHzdepending on model (see Appendix A)
When you have completed making your choice, click Next to continue.
Step 4, Hub Site Synchronization Settings
Figure 7-8: HSS Settings
The Synchronization Status dialog box displays the current status of each side of the link. See
Chapter 10 for instructions about installing and configuring collocated links. If you do not
require HSS, click Next.
Step 5, Services
Here is the services dialog:
To Next Page
Loading...
