Radwin WinLink 1000 User Manual

Installation Chapter 5
WinLink 1000 User Manual Release 1.9.40 5-15
Figure 5-17: TDM Jitter Buffer Configuration - ETBE evaluation bar
2. After setting the jitter buffer size, if grayed out, the Evaluate button is enabled while
both Back and Next are disabled as shown in the next figure:
Figure 5-18: Services and TDM delay set - link ready for evaluation
3. You may make any further changes to the Service Configuration or the Jitter
buffer. When you are satisfied, click the Evaluate.

Radwin WinLink 1000 Specifications

General

Brand	Radwin
Model	WinLink 1000
Category	Wireless Access Point
Language	English