Radwin WinLink 1000 User Manual

WinLink 1000 User Manual Release 1.9.40 C-1
Appendix C
Small Form-factor
Pluggable Transceiver
IDU-C SFP Support
The Small Form-factor Pluggable (SFP) transceiver, is a compact, hot-pluggable transceiver
used in communications applications.
The SFP transceiver technology allows almost any protocol converter implementation with
seamless integration to a standard Ethernet switch.
The IDU-C supports SFP transceivers to provide and support several network applications.
Any standard Fast Ethernet (FE) SFP transceiver can be plugged into the IDU-C. These SFPs
support various Ethernet interfaces. For example a fibre optic interface can be used to sup-
port long fibre distances.
In addition, System on SFP transceivers can be used, supporting a protocol converter con-
cept. The main application for such SFP transceivers is TDM over Ethernet providing E1/T1
or E3/T3 over full duplex Ethernet Remote Bridge
The following table provides a few SFP types that can be used with the IDU-C:
Table C-1: SFP Type and Interface description
SFP Type Interface Description
100baseT 100BaseT, IEEE 802.3, UTP CAT5
100baseFX Multimode fiber-optic (MMF) link spans up to 2km long
100baseLX Single-mode fiber optic (SMF) links pans up to 10km
100baseBX SMF single-strand link spans up to 10 km or 40 km
E3T3/FE E3/T3

Radwin WinLink 1000 Specifications

General

Brand	Radwin
Model	WinLink 1000
Category	Wireless Access Point
Language	English