WinLink 1000 User Manual Release 1.9.40 8-1
Chapter 8
Site Configuration
The Site Configuration dialog panels are used to configure parameters, which may differ
between both sides of the link.
The parameters configured using the Site Configuration dialog panels include (among oth-
ers):
• System settings
• Air interface - Transmit (Tx) power
• Hub Site Synchronization status
• Network management including VLAN
• Inventory - link hardware and software model details
• Security settings
• Date and time
• Ethernet service settings
• TDM Hot Standby status
• External alarms settings
• Operations - Revert to factory settings
The Operations dialog offers a “doorway” to jump into installation mode.
The Site Configuration dialog has its own main menu with the following extra functionality:
• Backup ODU software
• Restore ODU software or configuration from a backup file
• Refresh the current panel
• Enable/disable the site ODU buzzer
• Jump back into installation mode keeping current configuration settings
Configuring the Site
Editing the Configuration Parameters by Site
You can edit the configuration parameters for each site individually. The following functions
are available from the left side of the dialog box.
To Next Page
Loading...
