Radwin WinLink 1000 - Changing Band for DFS; Special Products or Features: Entering a License Key; Figure 20-6 Mainw

Changing Band for DFS Chapter 20
WinLink 1000 User Manual Release 1.9.40 20-5
Figure 20-6: Main Window after band change - new band circled
Changing Band for DFS
Changing to a DFS band is similar to the foregoing procedure.
As soon as you establish a link using a DFS band, you are offered Configuration only in the
main menu. Installation mode is disabled.
Special Products or Features: Entering a License Key
If you go to the Operations window as Installer (Figure 20-7), you will see a provision for
entering a license key. Should you ever require such a key, the procedure is as follows:
 To enter a License key:
1. Log on as Installer (as for the previous procedure).
2. Click the Site:Location tool bar button from the main tool bar.
Note
If you carry out this operation on a link, the band is effective on both sites
and you are placed in installation mode.