Radwin WinLink 1000 - Figure 8-16 Bridgec; Figure 8-17 Ethernet

Setting the Maximum Information Rate (MIR) Chapter 8
WinLink 1000 User Manual Release 1.9.40 8-20
Figure 8-16: Bridge Configuration - Site Configuration dialog box
3. In the Information Rate pane, use the drop-down menu to choose the MIR.
Figure 8-17: Ethernet MIR - Throughput selection
4. Choose Other to define the throughput with 1 Kbps resolution
5. Choose Best Effort for the highest information rate possible for the link conditions
and settings
6. Click Apply to save the changes.