MIB Traps Appendix D
WinLink 1000 User Manual Release 1.9.40 D-23
MIB Traps
General
Each ODU can be configured with up to 10 different trap destinations. When the link is oper-
ational, each ODU sends traps originating from both Site A and Site B.
The source IP address of the trap is the sending ODU. The trap originator can be identified by
the trap Community string or by the trap description text.
Each trap contains a trap description and additional relevant information such as alarm sever-
ity, interface index, time stamp and additional parameters.
winlink1000GeneralTelnetSupport 1.3.6.1.4.1.4458.1000.100.5 Integer RW Enable/Disable Telnet protocol.
Table D-2: Private MIB Parameters (Sheet 18 of 18)
Name OID Type
Access
Description
To Next Page
Loading...
Need help?
General
