R&S RTC1000 - Page 116

Signal Generation (Option R&S RTC-B6)
R&S
®
RTC1000
116User Manual 1335.7352.02 ─ 02
Table 10-2: Counter frequencies
Pin Frequency
P0 f/2
P1 f/4
P2 f/8
P3 f/16
10.2.3 Arbitrary
You can define a 4 bit wide and a 2048 sample deep arbitrary pattern. The created pat-
tern can be stored and loaded. If a pattern is generated when you call the arbitrary
function, the pattern is retained. Thus, you can can adapt and analyze the pattern as
necessary.
Figure 10-1: Arbitrary menu
The following settings are available:
PATTERN SETUP
Defines the pattern length and bit values.
Pattern Generator