R&S RTC1000 - Cursor<M>:Xdelta[:Value]; Cursor<M>:Xratio:unit; Cursor<M>:Ydelta:slope; Cursor<M>:Ydelta[:Value]

Remote Commands Reference
R&S
®
RTC1000
221User Manual 1335.7352.02 ─ 02
CURSor<m>:XDELta[:VALue]?
Returns the time difference between the two cursors (Δt).
Return values:
<Delta> Default unit: s
Usage: Query only
CURSor<m>:YDELta:SLOPe?
Returns the inverse value of the voltage difference - the reciprocal of the vertical dis-
tance of two horizontal cursor lines: 1/
Δ V.
Suffix:
<m>
.
1
The numeric suffix is irrelevant.
Return values:
<DeltyYslope> Inverse value
Usage: Query only
CURSor<m>:YDELta[:VALue]?
Queries the delta of the values in y-direction at the two cursors.
Suffix:
<m>
.
1
The numeric suffix is irrelevant.
Return values:
<DeltaY> Delta value in V
Usage: Query only
CURsor<m>:XRATio:UNIT <Unit>
Sets the unit for X Ratio measurements with CURSor<m>:XRATio[:VALue]?.
Parameters:
<Unit> RATio | PCT | GRD | PI
RATio
floating value
PCT
percent
GRD
degree
PI
radian
*RST: RAT
Measurements