R&S RTC1000 - Fft; Refcurve<M>:Data:yorigin; Refcurve<M>:Data:yresolution

Remote Commands Reference
R&S
®
RTC1000
237User Manual 1335.7352.02 ─ 02
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Return values:
<Yincrement> Voltage in V
Usage: Query only
REFCurve<m>:DATA:YORigin?
Returns the voltage value for binary value 0 of the indicated waveform. The commands
are relevant for data conversion, if binary data format is defined (FORM UINT, 8 | 16).
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Return values:
<Yorigin> Voltage in V
Usage: Query only
REFCurve<m>:DATA:YRESolution?
Returns the vertical bit resolution of the indicated waveform. The commands are rele-
vant for data conversion, if binary data format is defined (FORM UINT, 8 | 16).
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Return values:
<Yresolution> For default waveforms, the resolution is 8 bit. Its resolution is
depending on the source waveform. The maximum is 16 bit.
Usage: Query only
13.8 FFT
In all CALCulate:MATH<m> commands, the numeric suffix <m> is irrelevant. You can
omit it.
CALCulate:MATH<m>:ARIThmetics.................................................................................238
CALCulate:MATH<m>:FFT:WINDow:TYPE...................................................................... 238
CALCulate:MATH<m>:FFT:AVERage:COUNt...................................................................239
CALCulate:MATH<m>:FFT:MAGNitude:SCALe................................................................ 239
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution]:ADJusted?........................................ 240
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution]:AUTO...............................................240
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution]:RATio...............................................240
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution][:VALue]............................................ 240
FFT