R&S RTC1000 - Cursor<M>:Result; Cursor<M>:Tracking:scale[:State]; Cursor<M>:Xcoupling; Cursor<M>:Xdelta:inverse

Remote Commands Reference
R&S
®
RTC1000
220User Manual 1335.7352.02 ─ 02
CURSor<m>:TRACking:SCALe[:STATe] <State>
Enables the adjustment of cursor lines if the vertical or horizontal scales are changed.
Parameters:
<State> ON | OFF
ON
Cursor lines keep their relative position to the waveform.
OFF
Cursor lines remain on their position on the display if the scaling
is changed.
*RST: OFF
CURSor<m>:YCOupling
<Coupling>
CURSor<m>:XCOupling <Coupling>
If enabled, the cursors of a set are coupled so that the distance between the two
remains the same if one cursor is moved.
Suffix:
<m>
.
1
The numeric suffix is irrelevant.
Parameters:
<Coupling> ON | OFF
*RST: OFF
CURSor<m>:RESult?
Returns the cursor positions.
Return values:
<Value> Comma-separated list
Usage: Query only
CURSor<m>:XDELta:INVerse?
Returns the inverse time difference between the two cursors (1/Δt).
Suffix:
<m>
.
1
The numeric suffix is irrelevant.
Return values:
<DeltaInverse> Default unit: 1/s
Usage: Query only
Measurements