R&S RTC1000 - Bus<B>:Lin:frame<N>:Idpvalue; Bus<B>:Lin:frame<N>:Idvalue; Bus<B>:Lin:frame<N>:Systate

Remote Commands Reference
R&S
®
RTC1000
316User Manual 1335.7352.02 ─ 02
Return values:
<IdentifierState> OK | PRERror | UNDF | INSufficient
OK
Identifier state is o.k.
PRERror
Parity error at the identifier.
UNDF
Address is undefined.
INSufficient
Identifier is insufficient.
Usage: Query only
BUS<b>:LIN:FRAMe<n>:IDValue?
Returns the identifier value (address)
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
Return values:
<IdentifierValue> Decimal value
Usage: Query only
BUS<b>:LIN:FRAMe<n>:IDPValue?
Returns the parity value.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
Return values:
<IdentifierParityValue>Decimal value
Usage: Query only
BUS<b>:LIN:FRAMe<n>:SYSTate?
Returns the state of the sync field for the specified frame.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
Protocol Analysis