R&S RTC1000 - Bus<B>:Lin:frame<N>:Start; Bus<B>:Lin:frame<N>:Stop

Remote Commands Reference
R&S
®
RTC1000
314User Manual 1335.7352.02 ─ 02
Return values:
<FrameStatus> OK | CHKS | WAKeup | SYER | INS | ERR | UNDF | IPER
OK
Frame is valid.
CHKS
Checksum error occured.
WAKeup
Wake up occured.
SYER
Synchronisation
INS
Identifier is insufficient.
ERR
Error
UNDF
Undefined
IPER
ID parity error
Usage:
Query only
BUS<b>:LIN:FRAMe<n>:STARt?
Returns the start time of the specified frame.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
Return values:
<StartTime> Range: depends on sample rate, and time base
Default unit: s
Usage: Query only
BUS<b>:LIN:FRAMe<n>:STOP?
Returns the end time of the specified frame.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
Return values:
<StopTime> Range: depends on sample rate, and time base
Default unit: s
Protocol Analysis