R&S RTC1000 - Mask:action:yout:enable; Mask:data:xincrement; Mask:data:xorigin; Mask:data:yincrement

Remote Commands Reference
R&S
®
RTC1000
246User Manual 1335.7352.02 ─ 02
Example: 0.000E+00,5.990E+02,600,2
Usage: Query only
MASK:DATA:XINCrement?
Return the time difference between two adjacent samples of the mask waveform.
Return values:
<Xincrement> Time in s
Usage: Query only
MASK:DATA:XORigin?
Return the time of the first sample of the indicated mask waveform.
Return values:
<Xorigin> Time in s
Usage: Query only
MASK:DATA:YINCrement?
Return the voltage value per bit of the indicated mask waveform.
Return values:
<Yincrement> Voltage in V
Usage: Query only
MASK:DATA:YORigin?
Return the voltage value for binary value 0 of the indicated mask waveform.
Return values:
<Yorigin> Voltage in V
Usage: Query only
MASK:DATA:YRESolution?
Return the vertical bit resolution of the indicated waveform.
Return values:
<Yresolution> For default waveforms, the resolution is 8 bit.
Usage: Query only
MASK:ACTion:YOUT:ENABle <Yout>
Enable or disable of pulses at the AUX-OUTput if mask is violated.
Masks