R&S RTC1000 - Refcurve<M>:Data; Refcurve<M>:Data:header; Refcurve<M>:Horizontal:position; Refcurve<M>:Vertical:position

Remote Commands Reference
R&S
®
RTC1000
235User Manual 1335.7352.02 ─ 02
REFCurve<m>:HORizontal:POSition <Position>
Changes the horizontal position of the reference waveform independent of the channel
waveform settings.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Parameters:
<Position> Default unit: s
REFCurve<m>:VERTical:SCALe <Scale>
Changes the vertical scale of the reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Parameters:
<Scale> Default unit: V/div
REFCurve<m>:VERTical:POSition <Position>
Changes the vertical position of the reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Parameters:
<Position> Default unit: div
REFCurve<m>:DATA?
Returns the data of the reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Return values:
<Data> Comma-separated value list
Usage: Query only
REFCurve<m>:DATA:HEADer?
Returns information on the reference waveform.
Quickmath and Reference Waveforms