R&S RTC1000 - Bus<B>:Spi:frame<N>:Data; Bus<B>:Spi:frame<N>:Wcount; Bus<B>:Spi:frame<N>:Word<O>:Start

Remote Commands Reference
R&S
®
RTC1000
275User Manual 1335.7352.02 ─ 02
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame.
Return values:
<StopTime> Range: depends on sample rate and time base
Default unit: s
Usage: Query only
BUS<b>:SPI:FRAME<n>:DATA?
Returns the comma separeted frame data.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame.
Return values:
<Data> List of decimal values of data bytes
Example:
BUS:SPI:FRAM3:DATA?
Usage: Query only
BUS<b>:SPI:FRAME<n>:WCOunt?
Returns the number of words in the specified frame.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame.
Return values:
<WordCount> Number of words
Usage: Query only
BUS<b>:SPI:FRAME<n>:WORD<o>:STARt?
Returns the start time of the specified data word.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame.
<o> Selects the word number.
Protocol Analysis