R&S RTC1000 - Counter

Remote Commands Reference
R&S
®
RTC1000
259User Manual 1335.7352.02 ─ 02
DVM:POSition <Position>
Selects the display position of the digital voltmeter values.
Parameters:
<Position> TLEFt | TRIGht | BLEFt | BRIGht
TLEFt
Display position top left.
TRIGht
Display position top right.
BLEFt
Display position bottom left.
BRIGht
Display position bottom right.
*RST: TLEF
13.13 Counter
TCOunter:ENAB............................................................................................................ 259
TCOunter:RESult[:ACTual]:FREQuency?......................................................................... 259
TCOunter:RESult[:ACTual]:PERiod?................................................................................259
TCOunter:ENAB <Enable>
Enables or disables the trigger counter measurements.
Parameters:
<Enable> ON | OFF
*RST: OFF
TCOunter:RESult[:ACTual]:FREQuency?
Returns the frequency of the trigger source.
Return values:
<FrequencyValue> Default unit: Hz
Usage: Query only
TCOunter:RESult[:ACTual]:PERiod?
Returns the period of the trigger source.
Return values:
<PeriodValue> Default unit: s
Usage: Query only
Counter