R&S RTC1000 - Channel<M>:Data:envelope:xincrement; Channel<M>:Data:envelope:xorigin; Channel<M>:Data:envelope:yincrement; Channel<M>:Data:envelope:yorigin

Remote Commands Reference
R&S
®
RTC1000
190User Manual 1335.7352.02 ─ 02
Return values:
<DataHeader> Comma-separated value list.
Example: -9.477E-008,9.477E-008,1200,2
Usage: Query only
CHANnel<m>:DATA:ENVelope:XINCrement?
Returns the time difference between two adjacent samples of the indicated waveform.
The command is relevant for data conversion, if binary data format is defined (FORM
UINT,8|16|32).
Suffix:
<m>
.
Selects the input channel (1, 2).
Return values:
<Xincrement> Time in s.
Usage: Query only
CHANnel<m>:DATA:ENVelope:XORigin?
Returns the time of the first sample of the indicated waveform. The command is rele-
vant for data conversion, if binary data format is defined (FORM UINT,8|16|32).
Suffix:
<m>
.
Selects the input channel (1, 2).
Return values:
<Xorigin> Time in s.
Usage: Query only
CHANnel<m>:DATA:ENVelope:YINCrement?
Returns the voltage value per bit of the indicated waveform. The command is relevant
for data conversion, if binary data format is defined (FORM UINT,8|16|32).
Suffix:
<m>
.
Selects the input channel (1, 2).
Return values:
<Yincrement> Voltage in V.
Usage: Query only
CHANnel<m>:DATA:ENVelope:YORigin?
Returns the voltage value for binary value 0 of the indicated waveform. The command
is relevant for data conversion, if binary data format is defined (FORM UINT,8|16|32).
Suffix:
<m>
.
Selects the input channel (1, 2).
Acquisition and Setup