R&S RTC1000 - Refcurve<M>:Save; Refcurve<M>:Source; Refcurve<M>:Source:catalog; Refcurve<M>:Update

Remote Commands Reference
R&S
®
RTC1000
233User Manual 1335.7352.02 ─ 02
Parameters:
<State> ON | OFF
*RST: OFF
REFCurve<m>:SOURce <Source>
Defines the source of the reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Parameters:
<Source> CH1 | CH2 | POD | QMA | RE1...RE4
CH1 | CH2
Signal channels 1 to 2.
POD
Logic POD.
QMA
Quick math channel.
RE1...RE4
Reference channels 1 to 4.
*RST: CH1
REFCurve<m>:SOURce:CATalog?
Returns the source waveform - channel, math or reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Return values:
<Catalog> CH1 | CH2 | POD | QMA | RE1...RE4
Usage: Query only
REFCurve<m>:UPDate
Updates the selected reference by the waveform defined with REFCurve<m>:SOURce.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Usage: Event
REFCurve<m>:SAVE <FileName>
Stores the reference waveform the specified file.
Quickmath and Reference Waveforms