R&S RTC1000 User Manual

Network Connections and Remote Operation
R&S
®
RTC1000
160User Manual 1335.7352.02 ─ 02
12.2.5 Save/Recall
On the "Save/Recall" page, you can save waveform data and instrument settings to a
file - either on the computer (local file) or on the instrument (remote device). On the
computer, the default storage directory is the download folder, but you can change the
directory using the download functions of your browser. On the instrument, the files are
saved in the internal storage.
You can also load reference waveforms and instrument settings from file to the instru-
ment.
To save data to a file on the computer
1. Select the waveform or the device settings in the "Source" list.
2. Select the file "Format".
See also:
● Chapter 8.3.1, "Waveform File Formats", on page 101
● Chapter 8.2, "Reference Waveforms", on page 97
3. For analog and digital channels, select whether you want to read out the display
memory ("Display Data") or the entire acquisition memory ("Acq. Memory").
4. Click "Save".
Remote Access Using a Web Browser

R&S RTC1000 Specifications

General

Brand	R&S
Model	RTC1000
Category	Test Equipment
Language	English