R&S RTC1000 - Page 324

Remote Commands Reference
R&S
®
RTC1000
324User Manual 1335.7352.02 ─ 02
MMEMory:DCATalog:LENGth? <DirectoryName>
Returns the number of directories in specified directory. The result corresponds to the
number of strings returned by the MMEMory:DCATalog? command.
Query parameters:
<DirectoryName> String parameter
Specifies the directory.
Return values:
<FileEntryCount> Number of directories.
Usage: Query only
MMEMory:MDIRectory <DirectoryName>
Creates a new directory with the specified name.
Setting parameters:
<DirectoryName> String parameter
Complete path including the storage device.
Example: Create directory DATA on the front USB flash device, with abso-
lute path:
MMEM:MDIR "/USB_FRONT/DATA"
Usage: Setting only
MMEMory:CDIRectory <DirectoryName>
Specifies the current directory for file access.
Setting parameters:
<DirectoryName> String parameter to specify the directory.
If the string also contains the storage device, the command
MMEM:MSIS is executed implicitely.
Example:
MMEM:CDIR "/USB_FRONT/DATA"
MMEMory:RDIRectory <DirectoryName>
Deletes the specified directory.
Note: All subdirectories and all files in the specified directory and in the subdirectories
are deleted!
You cannot delete the current directory or a superior directory. In this case, the instru-
ment returns an execution error.
Setting parameters:
<DirectoryName> String parameter, absolute path or relative to the current direc-
tory
Usage: Setting only
Data and File Management