R&S RTC1000 - Page 330

Remote Commands Reference
R&S
®
RTC1000
330User Manual 1335.7352.02 ─ 02
Parameters:
<Setup> 488.2 block data
Usage: SCPI confirmed
SYSTem:ERRor[:NEXT]?
Queries the error/event queue for the oldest item and removes it from the queue. The
response consists of an error number and a short description of the error. Positive
error numbers are instrument-dependent. Negative error numbers are reserved by the
SCPI standard..
Return values:
<Error> List of:
<Error/event_number>,"<Error/event_description>[;<Device-
dependent info>]"
If the queue is empty, the response is 0,“No error“
Usage: Query only
SCPI confirmed
SYSTem:ERRor:ALL?
Queries the error/event queue for all unread items and removes them from the queue.
The response is a comma separated list of error number and a short description of the
error in FIFO order. Positive error numbers are instrument-dependent. Negative error
numbers are reserved by the SCPI standard.
Return values:
<Error> List of:
<Error/event_number>,"<Error/event_description>[;<Device-
dependent info>]"
If the queue is empty, the response is 0,“No error“
Usage: Query only
SCPI confirmed
SYST:PRESet
Resets the instrument to the default state, has the same effect as *RST.
Usage:
Event
SYSTem:BEEPer[:IMMediate]
Generates an immediate beep.
Usage:
Event
General Instrument Setup