REXROTH EcoDrive Cs - Mains Filter

To Next Page

To Previous Page

Rexroth EcoDrive Cs Drives Mains and Supply Voltage Connection 6-15

DOK-ECODR3-DKC**.3-CS*-PR02-EN-P

6.5 Mains Filter

Note: Mains filters are available from Rexroth to comply with EMC-

limits (see chapter 10 Additional Components).

When selecting the mains filter, the sum of the mains-side phase currents

Ein

of all drive controllers connected to the mains has to be taken into

account.

6 drive controllers of the DKC0x.3-W0008 (400 W) type are to be

operated with a mains filter. The resulting total current is 6*5.3 A = 31.8 A.

This means that the mains filter has to be dimensioned for at least

31.8 A

eff

phase current.

Note: You can find detailed information in the project planning

manual "Electromagnetic Compatibility (EMC) in Drive and

Control Systems", doc.-type

DOK-GENERL-EMV********-PRxx.

Example

Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com