Bb Bb contact (see control section X31.1 and X31.2); Bb contact HLB01
CNC Lag error message of control unit
F1 Fuse of power supply
F3 Fuse of 24V power supply unit
K1 External mains contactor (OFF delay must be smaller than td_on)
S1 Emergency stop
S2 Axis end position
S4 Power Off
S5 Power On
t
d_on
Delay of input X32/8
X1 Module bus
Fig.9-4: Control Circuit for Mains Connection of HCS02 and HLB01.1C
Bosch Rexroth AG DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
150/309
Circuits for the Mains Connection
To Next Page
Loading...
