REXROTH IndraDrive - Page 309

Additional components................................. 125
Motor paint coat
Additional paint coat....................................... 64
Mounting
Boring dimensions for the mounting plate.... 194
Mounting position
Definition (G1, G2, G3, G4, G5)..................... 62
IM B5.............................................................. 63
IM V1.............................................................. 63
IM V3.............................................................. 63
Motor-integrated servo drive.......................... 63
Multiple-line arrangement of drive controllers... 218
N
NFD
Brief description............................................. 47
NFE
Brief description............................................. 47
Noise emission
Measures for reduction................................ 187
Of the drive system...................................... 182
Noise immunity
Limit values.................................................. 182
Noise immunity in the drive system.................. 181
Number of axes
At HMV01..................................................... 111
At HMV02..................................................... 112
Capacitance against housing Cy................... 95
HCS02......................................................... 114
HCS03......................................................... 117
Orientation guide............................................ 95
O
Operating conditions........................................... 58
Operation at partial load............................ 260, 266
Operation under rated conditions...................... 266
Operator terminals
VCP.............................................................. 136
Overvoltage limitation
Note on project planning................................ 75
Overvoltage limiter
Derating vs. installation altitude............... 60, 61
Overvoltage limiters............................................ 75
P
Packaging......................................................... 281
Parallel operation
HCS02 with HCS02..................................... 102
HCS03 with HCS03..................................... 102
HMV............................................................... 98
HMV01, control circuit.................................. 155
Number of components HCS....................... 104
Peak regenerative power
Calculations................................................. 257
PELV................................................................... 41
Phase current
Calculating................................................... 260
Power consumption
Maximum....................................................... 69
Typical............................................................ 69
Power dissipation
Calculations................................................. 252
Power factor cosφ
Calculations................................................. 262
Power factor cosφ1
Calculations................................................. 262
Power factors.................................................... 290
Power supply
Switching off................................................. 143
Switching on................................................. 143
Power voltage
Power voltage supply..................................... 73
Production processes....................................... 281
Products
Short designations....................................... 285
Project planning
Of cooling system........................................ 215
Project Planning Manuals................................... 29
Protection systems
At the mains connection................................. 84
Protective extra-low voltage................................ 41
Protective grounding........................................... 85
R
RCCB.................................................................. 89
RCD.................................................................... 89
RD500
Supply unit................................................... 105
Recycling.......................................................... 281
Reference documentations................................. 29
Regenerative power
Calculations................................................. 251
Rel 1
Configuration as Bb contact......................... 145
Residual-current-operated circuit breakers......... 89
Resolver............................................................ 133
Return of products............................................ 281
Rexroth IndraDrive
Hierarchical levels.......................................... 11
System platform............................................. 11
System presentation...................................... 11
Rexroth IndraDrive C
Drive system.................................................. 12
Rexroth IndraDrive M
Drive system.................................................. 14
Rexroth IndraDrive Mi
Drive system.................................................. 17
S
Safety instructions for electric drives and
controls............................................................... 37
Selection aid
HLB.............................................................. 122
HLR.............................................................. 122
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
Bosch Rexroth AG 307/309
Index