SYNAX200 Determining the Control-Related Plug-In Cards 6-7
DOK-SYNAX*-SY*-07VRS**-PR01-EN-P
Incremental Encoder Emulation
The master axis position can be generated as an incremental signal via
the incremental encoder emulation interface DAE.
The DAE card can be placed in any drive in the fibre-optics ring for this
purpose.
SY7PR067.FH7
incremental encoder
emulation
DAE
in the slot of a
DKR/HDS
Fig. 6-13: Incremental encoder emulation DAE
The master axis position can be generated as an incremental signal via
the incremental encoder emulation interface X9 in any drive in the fibre-
optics ring.
See Fig. 6-12: Master axis position - SSI output interface on
DIAX03, DIAX04
ECODRIVE03
To Next Page
Loading...
