REXROTH SYNAX200 - Drive Configuration DIAX03 Based on Basic Configuration BE45

SYNAX200 Drive Configurations 7-7
DOK-SYNAX*-SY*-07VRS**-PR01-EN-P
7.5 Drive Configuration DIAX03 Based on Basic
Configuration BE45
Features
DAG
01.2M
DEA
04.2M
DEA
08.1M
DEF
01.1M
DEF
02.1M
DFF
01.1M
DLF
01.1M
DAE
02.1M
DSA
01.1M
DZF
02.1M
DZF
03.1M
analog inputs
XX
digital input/output
XX
ext. measurement system with
Heidenhain sine encoder
X X
ext. measurement system with
Heidenhain square-wave
encoder
XXX
ext. measurement system with
DSF encoder (1)
X X
ext. measurement system with
gear wheel encoder (Indramat)
X X
master axis encoder measure-
ment with DSF encoder (1)
X
X
master axis position output
XX
plug-in modules determined: X
Fig. 7-7: Additional features based on basic configuration BE45
(1) If the standard interface X4 is not used, then there is no need for the
DFF module.