REXROTH SYNAX200 - Drive Configuration DIAX04 Based on Basic Configuration HS32

SYNAX200 Drive Configurations 7-11
DOK-SYNAX*-SY*-07VRS**-PR01-EN-P
7.7 Drive Configuration DIAX04 Based on Basic
Configuration HS32
Features:
DAG
01.2M
DEA
04.2M
DEA
08.1M
DEF
01.1M
DEF
02.1M
DFF
01.1M
DLF
01.1M
DAE
02.1M
DSA
01.1M
DZF
02.1M
DZF
03.1M
analog input
XX
digital input/output
X X
ext. measurement system with
Heidenhain square-wave
encoder
X
X
ext. measurement system with
DSF encoder (1)
X
X
ext. measurement system with
SSI interface
X
X
ext. measurement system with
EnDat encoder
X X
master axis encoder measure-
ment with DSF encoder (1)
X X
master axis encoder measure-
ment with EnDat encoder
X X
master axis encoder measure-
ment with SSI interface
X
X
master axis position output
XX
plug-in modules determined: X
Fig. 7-11: Additional features based on basic configuration HS32
(1) If the standard interface X4 is not used, then there is no need for the
DFF module.