Ricoh B132 - Attaching the Interposer Tray (B700;B701;B706)

COVER INTERPOSER TRAY (B704)
SM 1-109 B132/B200
Installation
Attaching the Interposer Tray (B700/B701/B706)
1. Lift the cover interposer tray. Then, align the keyholes [A] with the shoulder
screws [B], and move the cover interposer down onto the screws.
2. Attach the cover interposer with the screw [C] ( x 1, M3 x 6).
3. If you will install the cover interposer tray on the B700/B701, do not do the next
section. Go directly to “Docking Finisher/Interposer” on page 1-112.
-or-
If you will install the cover interposer tray on the B706, go to the next section,
install the corner plates on the B706, then go to “Docking Finisher/Interposer”
on page 1-112.
B704I105.WMF
[A]
[B]
[C]