HDD UNIT
SM 3-141 B132/B200
Replacement &
Adjustment
3.15 HDD UNIT
Important
• The HDD contains four separate hard disks. However, the four disks are always
replaced together as a unit. Never attempt to replace a single disk.
Remove:
• Rear covers (!1.3.6)
• Controller box cover (!3.14.4)
[A]: HDD unit ( x8, x4)
Important
• Mark the harness connectors before you disconnect them. They must be
reconnected at their connection points.
1. Reassemble the machine.
2. Enter the SP mode and do SP5832 001 to format the hard disks. Formatting on
the machine partitions the hard disks properly.
3. Do SP5853 001 to download the fixed stamps from the ROM to the HDD.
4. Switch the machine off and on to enable the fixed stamps for use.
B132R707.WMF
[A]
To Next Page
Loading...
