Ricoh B132 - Skew Adjustment after Laser Unit Replacement

IMAGE ADJUSTMENTS
B132/B200 3-180 SM
3.19.5 SKEW ADJUSTMENT AFTER LASER UNIT REPLACEMENT
To Print the Trim Pattern:
1. Do SP2109 002 (Test Pattern – Select Pattern) and select pattern 10.
2. Touch [Execute] on the display.
3. Touch [Copy Screen] on the display to switch to the normal copier screen.
4. Select the paper size and color then press the [Start] key to print the pattern.
5. Touch [SP Screen].
6. Do SP2109 002 and select pattern 0 and touch the [Execute] button.
7. Check the test pattern to determine whether the image is perpendicular at the
corners.
If the image pattern is correct, no further adjustment is necessary.
-or-
If the pattern is not correct (a skewed parallelogram), go to the next step.