Ricoh B132 - Install the Key Card Bracket and Assembled Key Counter

KEY CARD BRACKET (B498), KEY COUNTER BRACKET (B452)
B132/B200 1-50 SM
Install the Key Card Bracket and Assembled Key Counter
WARNING!
Always turn the machine off and disconnect the machine power cord
before you do this procedure.
1. Remove the cover [A] ( x2).
2. Remove the right upper cover [B] ( x2).
3. Remove the three caps [C].
4. Attach the stud [D].
5. Put the keyholes [E] of the key card table [F] over the heads of the shoulder
screws, as shown above. Then tighten the screws to attach the table (M4 x 14,
 x2).
B498I002.WMF
B498I003.WMF
[A]
[B]
[C]
[D]
[F]
[E]