MFP CONTROLLER OPTIONS
B132/B200 1-116 SM
1.16.3 APPLICATIONS PROVIDED ON SD CARDS
These applications are available on SD cards [A]. You install them in Slot 2:
• Printer/Scanner Unit Type 3260 B737
• PostScript3 Unit Type 3260 B761
• Data Overwrite Security Unit Type C B735-17
Slot 2 is the only slot available for these application SD cards.
If the customer must use more than one application, then the applications must be
put together on one SD card. (%1.16.5)
Important
• Slot 1 (the lower slot) is for the system SD card only. The system SD card must
not be removed. The machine will show SC732 if a different SC card is put in
Slot 1.
• Slot 2 holds the application SD card. It also holds the target SD card when
applications are put together on one card.
• Slot 3 (the top slot) is used to update the machine firmware. It also holds the
source SD card when applications are put together on one card.
B132I909.WMF
[A]
To Next Page
Loading...
