Ricoh B132 - Duplex Jogger Belt

DUPLEX UNIT
SM 3-109 B132/B200
Replacement &
Adjustment
3.10.5 DUPLEX JOGGER BELT
Remove:
• Remove the inverter unit (!3.10.3)
• Cross stay (!3.10.3)
• Reverse trigger roller assembly (!3.10.3)
• Jogger fences (!3.10.3)
• Left transport cover (!3.10.3)
• Jogger motor assembly (!3.10.4).
1. If you are replacing the belt, set both jogger fence brackets at the center of the
belt and tighten the screw [A].
2. If you are adjusting the belt, loosen the screw and slide the plastic piece [B] on
the belt to the left or right to adjust the position of the front fence, then tighten
the screw.
B140R819.WMF
[A]
[B]