PAPER EXIT
B132/B200 6-150 SM
6.17 PAPER EXIT
6.17.1 FACE UP EXIT MECHANISM
[A]: Inverter Junction Gate Solenoid
[B]: Inverter Junction Gate
[C]: Exit Sensor
When the inverter is used (duplex mode, or face-down output):
• Inverter junction gate solenoid [A] ! Off
• Inverter junction gate [B] ! Open
!
• Paper goes down to the inverter "
When the inverter is not used (face-up output, or when paper was fed from the
bypass tray):
• Inverter junction gate solenoid [A] ! On
• Inverter junction gate
' ! Closed
• Paper goes up to the output tray (
The exit sensor [C] detects the leading and trailing edge of each sheet as it feeds
out and triggers a jam if the paper is late or stops.
B132D504.WMF
[B]
[A]
!
"
'
(
[C]
To Next Page
Loading...
