MFP CONTROLLER OPTIONS
SM 1-133 B132/B200
Installation
Installation
1. Remove the I/F cover slot [A] of Slot D ( x2).
2. Touch a metal surface to remove static charge from your hands before you
touch the interface card.
3. Put the interface board [B] in Slot D.
4. Check that the board is fully in the slot, then attach it ( x2).
5. Remove the cap [C] and discard it.
6. Put the card [D] in the slot of the interface card.
7. Turn the machine off and on. Then do SP5990 to print an SMC Report to check
that the interface board is installed correctly.
B737I105.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
