COMMON REMOVAL PROCEDURES
SM 3-9 B132/B200
Replacement &
Adjustment
3.2.5 RIGHT COVERS
Remove:
• Disconnect and separate the LCT if it is installed.
[A]: Knockout ( x2). This has been removed already if the LCT has been
installed.
[B]: Open the bypass tray.
[C]: Right upper cover ( x2). Pull the bottom of the cover down and toward you
as you remove it.
[D]: Right lower cover ( x5). Pull the bottom of the cover down and toward you as
you remove it.
Reinstallation
• Make sure all the cover tabs are inserted correctly before you fasten the screws.
B132R704.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
