SCANNER UNIT
SM 3-27 B132/B200
Replacement &
Adjustment
3.3.3 EXPOSURE LAMP
Remove:
• Exposure glass (!3.3.1)
• Operation panel (!3.2.2)
1. Slide the 1st scanner [A] to the cutout in the frame.
2. Remove the exposure lamp [B] ( x1, x1, x1)
Important:
• Never touch the surface of the exposure lamp with bare fingers.
• Work carefully to avoid damaging the relay plugs attached to the rear ends of the
lamp.
B132R129.WMF
[A]
[B]
To Next Page
Loading...
