PAPER FEED
B132/B200 6-106 SM
Lift Sensor
Tray lift motor ! on, pick-up solenoid [A] ! on, pick-up roller [B] lowers.
When the top sheet of paper reaches the proper paper feed level, actuator [C] on
the pick-up roller support [D] activates the tray lift sensor [E], and the lift motor
stops.
After several paper feeds, the paper level gradually lowers and the lift sensor de-
activates. Next, the lift motor turns on again until the lift sensor once again
activates.
When the tray is pulled out of the feed unit, coupling [F] disengages pin [G] on
shaft [H], and the tray bottom plate [I] drops by its own weight.
B132D934.WMF
B132D935.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
[H]
[I]
To Next Page
Loading...
