Ricoh B132 - Paper Feed and Separation

PAPER FEED
B132/B200 6-108 SM
Paper Feed and Separation
If a paper feed station is not selected, its separation roller solenoid [A] stays off and
the separation roller [B] can turn freely.
When the paper feed station is selected and the start key is pressed, the following
mechanisms activate:
• Separation roller solenoid [A] → separation roller [B] contacts feed roller [E]
• Pick-up solenoid [C] → pick-up roller [F] lowers to contact the paper
• Paper feed motor [D] → turns feed roller [E] → turns pick-up roller [F] via gear
[G]
When the paper feed sensor [H] detects the leading edge of the paper:
• Pick-up solenoid [C] switches off, and pick-up roller [F] lifts.
• The feed roller [E] then feeds the sheet to the registration roller.
Note the three one-way clutches [I]: One for the grip roller, one for the feed roller,
and one for the gear [G], which drives the pickup roller.
When the feed motor rotates forward:
Feed roller
!
Rotates
Separation
roller
!
Rotates in accordance with the FRR principle
 Handling Paper> Paper Feed Methods> Forward and
Reverse Roller (FRR)
Grip roller
!
Rotates
B132D937.WMFF
[D]
[A]
[C]
[I]
[F]
[B]
[E]
[H]
[G]