SERVICE PROGRAM TABLES
B132/B200 5-96 SM
Group 4000
4008 Sub Scan Mag Sub Scan Magnification Adjustment
Adjusts the sub-scan magnification by changing the scanner motor speed.
[-10~+10/0.1%]
4010 Sub Scan Reg Sub Scan Registration Adjustment
Adjusts the leading edge registration by changing the scanning start timing in the sub-
scan direction.
[-30~+30/0.1 mm]
4011 Main Scan Reg Main Scan Registration Adjustment
Adjusts the side-to-side registration by changing the scanning start timing in the main
scan direction.
Note: This adjustment is done for the ADF with SP6006 (ADF Reg. Adj.).
[-25~+25/0.1 mm]
4012 Set Scale Mask Set Mask for Scale Edge
Sets the blank margin at each side for erasing the original shadow caused by the gap
between the original and the scale. This can be done for both scanning on the
exposure glass (book mode) and the ADF (ADF) for the leading and trailing edges.
001 Book:Sub LEdge
002 Book:Sub TEdge
003 Book:Main:LEdge
004 Book:Main:TEdge
005 ADF:Sub:LEdge
007 ADF:Main:LEdge
008 ADF:Main:TEdge
[0~30/0.1 mm]
4013 Scan Free Run Free Run: Scanner
Performs the scanner free run with the exposure lamp on or off for full-color, full size
(A3 or DLT).
001 Lamp:OFF
002 Lamp:ON
[0~1/1] 0:Off, 1:On
4014 Scan Execute Scan DFU
These SPs enable/disable detection of the scanner at its home position.
001 Enable Enables detection of the scanner at its home position.
002 Disable Disables detection of the scanner at its home position.
To Next Page
Loading...
