Ricoh B132 - Drawer Unit

COMMON REMOVAL PROCEDURES
B132/B200 3-20 SM
3.2.9 DRAWER UNIT
To pull out the drawer unit:
1. Remove the front door. (!3.2.4)
2. Rotate the lever [A] down to left until it stops.
3. Grip the lever to pull the unit [B] out of the machine until it stops.
To remove the drawer unit:
4. Disconnect the left rail [C] ( x2).
5. Disconnect the right rail [D] ( x2).
6. Lift the unit off the rails.
CAUTION
The drawer unit is very heavy (30 kg/66lb.). After removing it, push the rails
into the machine.
B132R900.WMF
B132R301.WMF
[A]
[B]
[C]
[D]