Ricoh B132 - Attaching the Extensions for the B700;B701

COVER INTERPOSER TRAY (B704)
B132/B200 1-108 SM
Attaching the Extensions for the B700/B701
1. Attach the three shoulder screws [A] !"# ( x 3).
2. If the finisher was previously installed, remove the ground plate [B] from the
finisher and keep the screws.
3. Attach the bottom plate [C] ( x 2, M3 x 6) then attach the ground plate to the
bottom plate ( x 2).
4. Attach the bottom front cover extension [D] ( x 2, M4 x 8).
5. Attach the top front cover extension [E] ( x 2, M4 x 8).
6. Attach the rear cover extension [F] ( x 2, M3 x 6).
B704I104.WMF
[A]
[B]
[C]
[D]
[E]
[F]
!
"
#