MFP CONTROLLER OPTIONS
SM 1-131 B132/B200
Installation
Installation Procedure
1. Remove the I/F cover slot [A] of Slot D ( x2).
2. Touch a metal surface to remove static charge from your hands before you
touch the interface card.
3. Put the interface board [B] in Slot D.
4. Check that the board is fully in the slot, then attach it ( x2).
5. Put the Bluetooth card [C] in the slot of the interface board.
6. Push the antenna cap [D] to extend it.
7. Attach the card cover [E] (used to prevent static electricity).
8. Turn the machine off and on. Then do SP5990 to print an SMC Report to check
that the interface board is installed correctly.
B737I104.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
